OM6010 Payload Meter II - Section 60 Page 60-19 Setting The Machine I.D. Code 1. Press and hold the MODE switch until "Cd:dP" is displayed. Setting The Time and Date 1. Press and hold the MODE switch until "Cd:dP" is displayed. 2. Press the MODE switch once. The display will show: 2. Press the MODE switch once. The display will show: 3. Press the MODE switch once. The display will show: 3. Press the MODE switch once. The display will show: 4. Press the MODE switch once."d.XXX" is displayed. 4. Press the MODE switch repeat- edly until "XX:XX" is displayed. 5. Press the LIGHT/INC switch to change the last digit to the desired number. 5. Press the LIGHT/INC switch to change the minutes. 6.
Press the TOTAL/SFT switch and the display will show: 6. Press the TOTAL/SFT switch and the display will then indicate: 7. Press the LIGHT/INC switch to change the middle digit to the desired number. 7. Press the LIGHT/INC switch to change the hours. The clock is a 24 hour clock. 8. Press the TOTAL/SFT switch and the display will show: 8. Press the TOTAL/SFT switch and the display will then indicate: 9. Press the LIGHT/INC switch to change the first digit to the desired number. 9. Press the LIGHT/INC switch to change the day. 10. Press the MODE switch to return to normal operation. 10. Press the TOTAL/SFT switch and the display will then indicate: Setting The Operator I.D. Code 11.
Press the LIGHT/INC switch to change the month. 1. Press and hold the MODE switch until "Cd:dP" is displayed. 12. Press the TOTAL/SFT switch and the display will then indicate: 2. Press the MODE switch once. The display will show: 13. Press the LIGHT/INC switch to change the year. 3. Press the MODE switch once. The display will show: 14. Press MODE switch to return to normal opera- tion. 4. Press the MODE switch repeat- edly until "o.XXX" is displayed. 5. Press the LIGHT/INC switch to change the last digit to the desired number. 6. Press the TOTAL/SFT switch and the display will then indicate: 7. Press the LIGHT/INC switch to change the middle digit to the desired number. 8.
Press the TOTAL/SFT switch and the display will show: 9. Press the LIGHT/INC switch to change the first digit to the desired number. 10. Press the MODE switch to return to normal operation.