Seat belt 017 Adjust the seat belt height When adjusting the safety belt upward, you just directly move the height of safety belt upward to adjust the device till it is in the proper position. The downward adjustment method is as follows: 1. Pinch the seat belt guide part -1-. 2. Move the guiding element down to To get the most protection from the seat belt, be sure to sit upright and well back in the seat and wear the seat belt properly. In the event of an acci dent, the passenger may be seriously injured if the incorrect seat belt is worn! WARNING 1 1 adjust the safety belt to the position that suits your body shape. 3. Loosen seat belt guide part. 4.
After adjusting the height of safety belt, The seat belt must pass through the center of the passenger's shoulder and must not be tied to the neck. The safety belt must be flat and close to the passenger's chest. The seat belt must pass over the panssenger’ pelvis rather than the stomach. The seat belt must be flat, close to the pelvis, and tensioned as required. If the safety belt is not fastened enough, it will slip to the location of your stomach or neck so that it may do a serious harm to the pas senger. you need to pull the safety belt with force to check whether the guiding element is securely locked.
To adjust the device by making use of the safety device’s height may move the safety belt up and down, so as to make the safety belt fit with your body well.