Komatsu — WHEN TOWING

PRECAUTIONS FOR OPERATION SAFETY TOWING WHEN TOWING Serious injury or death could result if a disabled machine is towed incorrectly or if there is a mistake in the selec- tion or inspection of the wire rope. For towing method, see the section of "TOWING THE MACHINE (PAGE 3-102)". G Always wear leather gloves when handling wire rope. G Connect a wire rope to the part indicated with the arrow in the diagram at right. G During the towing operation, never stand between the tow- ing machine and the machine being towed. G Never tow a machine on a slope. G Never use a wire rope which has cut strands (A), reduced diameter (B), or kinks (C).

There is danger that the rope may break during the towing operation. G If the engine stops or the oil pressure in the brake circuit lowers because of a trouble in the hydraulic system, the brake works and the machine cannot move. To move the machine in this case, the oil pressure in the brake circuit must be heightened to the specified level with a special device. Ask your Komatsu distributor. 2-26