EXPLANATION OF COMPONENTS OPERATION G Tilting control (e)LEFT TILT (f)RIGHT TILT Tilting distance of power angle, power tiltdozer G Angling control (A)LEFT ANGLE (B)HOLD: Blade is stopped and held in this position. (C)RIGHT ANGLE Turn the knob to the right or left to angle the blade. REMARK G When performing only angling operation, be sure to set the lever in the neutral (HOLD) position and turn the knob to the right or left. G If the angling operation is performed while the lever is not in the neutral (HOLD) position (while either or both of lifting and tilting operations are performed), all of those opera- tions can be continued, but the moving speed of the blade is lowered.
Select the operations according to the type of the work. G If the lifting or tilting operation is performed while angling operation is performed, the machine moves similarly to the above. 3-20 Condition of blade Tilting distance STD blade Wide blade D61PX D61EX D61EX Right tilt 600mm (23.6in) 510mm (20.1in) 600mm (23.6in) Left tilt 600mm (23.6in) 510mm (20.1in) 600mm (23.6in)