116 Maintenance Section Articulation Bearings - Lubricate SEBU7645-06 101698389 Articulation Lubricate Bearings - SMCS Code: 7057-086-BD; 7065-086-BD; 7066-086-BD Wipe the grease fittings before you lubricate the grease fittings. g00916582 Illustration 112 i. Make sure that there is no pressure in the lines for the axle oil. Loosen the fitting on the hose and drain the oil from the line into a suitable container. Dispose of the oil properly. 2. Remove the screen from the rear of the axle housing. Clean the screen in a clean, nonflammable solvent. g00614530 Illustration 111 3. Install the screen and the hose. Apply lubricant to one grease fitting on the upper pivot bearing (1). 4.
Check for leaks. Make any necessary repairs. Apply lubricant to one grease fitting on the lower pivot bearing (2). 102154820 Axle Oil Cooler Screen Clean/Replace - 101767868 Axle Oscillation Bearings Lubricate SMCS Code: 3268-086-BD; 3278-086-BD SMCS Code: 1365-070-Z3; 1365-510-Z3 Reference: For information about containing fluid Spillage, refer to Operation and Maintenance Manual, “General Hazard Information’. Clean the screens after any maintenance on the brake system. IWustration 113 924G\924Gz g00614728