SAFETY GENERAL PRECAUTIONS WARNING: Failure to follow these safety precautions may lead to a serious accident. G Before making a modification, consult your Komatsu distribu- tor. Komatsu will not be responsible for any injury or damage caused by any unauthorised modification. ALWAYS APPLY LOCK WHEN LEAVING OPERATOR’S SEAT G When standing up from the operator’s seat, always raise the control lever Pad Safety lock to the LOCK position. If you accidentally touch the travel or swing lever when they are not locked, the work equipment may suddenly move and cause serious injury or damage.
G When leaving the machine, lower the work equipment com- pletely to the ground, set the control lever Pad safety lock lever to the LOCK position, then stop the engine and use the key to lock all the equipment. Always take the key with you. Work equipment posture see “PARKING MACHINE” on page 136. MOUNTING AND DISMOUNTING G NEVER jump on or off the machine. NEVER get on or off a moving machine. G When mounting or dismounting, always face the machine and use the handrails, machine or chassis steps. G Do not hold any control levers when getting on or off the machine. G Ensure safety by always maintaining at least three-point con- tact of hands and feet with the handrails, steps or wheels.
G Always remove any oil or mud from the handrails, steps and track shoes. If they are damaged, repair them and tighten any loose bolts. G If grasping the door handrail when mounting or dismounting or moving on the chassis steps, open and lock the door securely in the open position. Otherwise, the door may move suddenly, causing you to lose balance and fall. FIRE PREVENTION FOR FUEL AND OIL Fuel, oil, and antifreeze can be ignited by a flame. Fuel is particu- larly FLAMMABLE and can be HAZARDOUS. G Keep flames away from flammable fluids. G Stop the engine and do not smoke when refuelling. 17