PRECAUTION DURING OPERATION SAFETY WARNING: For reasons of safety, always follow these safety precautions. CHECK THAT NO ONE IS IN THE AREA BEFORE SWINGING OR TRAVELLING IN REVERSE G Always position a signalman when operating in dangerous places or places where the view is not clear. G Make sure that no one comes inside the swing radius or direction of travel. G Before starting to move, sound the horn or give a signal to warn people not to come close to the machine. A0067200PW G There are blind spots behind the machine, so if necessary, swing the upper structure to check that there is no one behind the machine before travelling in reverse.
A0067190PW PRECAUTIONS WHEN TRAVELLING G Fold in the work equipment as shown in the diagram below, and keep it at a height of 40-50 cm from the ground level before starting to travel. G When travelling on public roads the control lever pad safety lock should be down and the control lever lock switch, in the off position. This prevents operation of the control levers and activates the rear facing brake lamp circuit. AM089000PW G When travelling on rough ground, travel at low speed, and avoid sudden changes in direction. G Avoid travelling over obstacles as far as possible.
If the machine has to travel over an obstacle, keep the work equip- ment as close to the ground as possible and travel at low speed. Never travel over obstacles which make the machine tilt strongly (10° or more). 24 INC ORRECT AM089010PW