OPERATION EXPLANATION OF COMPONENTS the control levers may not be properly locked. Check that the situation is as shown in the diagram. G When the control lever pad safety lock lever is raised, take care not to touch the work equipment control lever. If the safety lock lever is not properly locked at the upper position, the work equipment and swing will move, creat- ing a potentially dangerous situation. G When the control lever pad safety lock is lowered, take care not to touch the work equipment control lever. The control lever pad locks the work equipment, swing and attachment controls.
This device is a hydraulic lock, so even if it is in the lock position, the work equipment control lever will move, but the work equip- ment and swing motor will not work. 2. LEFT WORK EQUIPMENT CONTROL LEVER (with auto-deceleration device) If any lever is operated when in the deceleration range, the engine speed will suddenly increase, so be careful when operating the levers. AM089560A This lever is used to operate the arm and upper structure. N (Neutral) 81 WARNING Arm operation Swing operation (A) Arm OUT (C) Swing to right (B) Arm IN (D) Swing to left