OPERATION EXPLANATION OF COMPONENTS CAP, COVER WITH LOCK The fuel filler, operator’s cab, engine hood, tool box cover, right side door and left side door of the machine body are fitted with locks. Use the starting switch key to lock or unlock these places. METHOD OF OPENING AND CLOSING CAP WITH LOCK (For the fuel tank filler port) type A To open the cap 1. Insert the key into the cap. 2 2. Turn the key clockwise, align the match mark on the cap with the rotor groove, then remove the cap. 1 AW34934D To lock the cap 1. Turn the cap into place. type B 2. Turn the key and take the key out. 3 1 2 AW34935D Insert the key as far as it will go.
If the key is turned before it is inserted all the way, it may break. A AL067870A METHOD OF OPENING AND CLOSING COVER WITH LOCK (cover with lock) To open the cover (locked cover) 1. Insert the key. 2. Turn it counterclockwise and open the cover by pulling the cover grip. To lock the cover 1. Close the cover and insert the key. 2. Turn the key clockwise and take the key out. 89