Cab Getting to Know Your Vehicle Using a suitable implement inserted into the slot provided, release the trim cover (1) and then extract it from its slotted location in the mirror head. As applicable, release/tighten the mirror head retaining bolt (2) to 11 lb. ft. (15 Nm). When replacing the mirror head trim cover, ensure that it is correctly located within its slotted location and then pushed firmly in to its engaged position; no gaps must exist between the trim cover (slot- ted end) and mirror head. The mirror arms are held in position by a detent located under the mirror arm shroud.
The detent is equipped with a spring-loaded clutch to enable the mir- Mirror arm fold positions When required, the attachment of the door mirror head to the mirror arm can be loosened (to aid adjustment) or tight- ened (to secure in position) using the following procedure: Mirror head attachment instrument panel. This warning light must remain extinguished when the ignition is switched on. This vehicle is equipped with electri- cally heated door mirrors, a passenger- side mirror and, dependent upon vehi- cle specification, an auxiliary wide angle mirror (electrically heated). Door Mirrors