Komatsu — Komatsu Operation and Maintenance Manual (EN)

. SAFETY GENERAL PRECAUTIONS SAFETY FEATURES 2 - 12 Be sure that all guards and cov ers are in their proper position. Have guards and cove rs repaired immediately i they are damaged. Understand the method of use Never remove any safety featur KEEP MACHINE CLEAN If water gets into the electrical s ystem, there is a hazard that it will cause malfunction s or misoperation. Do no use water or steam to wash the electrical system (sensors, connectors). s carried out when the machine is a hazard that you will slip and nto your eyes. Always keep the If inspection and maintenance i is still dirty with mud or oil, there fall, or that dirt or mud will get i machine clean.

is still dirty with mud or oil, there INSIDE OPERATOR'S COMPARTMENT mpartment, always remove all mud and oil from the soles of your shoes. When entering the operator's co mpartment, always remove all mud and oil from the s If you operate the pedal with m ud or oil affixed to your shoes, your foot may slip and this may cause a serious accident. around the operator's compartment. window glass. Suction pads act as a lens and may cause fire. nside the operator's compartment when driving or operating the machine. ects such as flammable or explosive items into the operator's compartment. Do not leave parts or tools lying Do not stick suction pads to the window glass.

Suction pads act as a lens and may ca Do not use cellular telephones i nside the operator's compartment when driving or ope Never bring any dangerous obj ects such as flammable or explosive items into the ope ALWAYS APPLY LOCK WHEN LEAVIN G OPERATOR'S SEAT Before adjusting or standing up from the operator's seat, always set shift lever (1) to t he N position and parking brake switch (2) to the PARKIN G position, then stop the engine. If the shift lever or dump lever ar e touched by mistake, there is danger that the machine may suddenly move and cause serious personal injury o r damage. ys place shift lever (1) at neutral ) to the PARKING position. ump lever to the HOLD position, knob.

Apply all the locks and ey with you and keep it in the When leaving the machine, alwa and set parking brake switch (2 Lower the dump body, set the d and lock with the safety lock always remember to take the k fixed place. and set parking brake switch (2 Lower the dump body, set the d