. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS E01: If maintenance location is displayed and the maintenance caution lamp lights up, carry out inspection and maintenance of the displayed item after the completion of operations or when the shift changes. If "MAINTENANCE" is displayed together with E01, check the failure code and contact your Komatsu distributor for repairs. REMARK The top line of the character display displays "E01" and the bottom line displays "MAINTENANCE" or displays the location needing inspection, filling, or replacing.
FILTER, OIL REPLACEMENT TIME DISPLAY After completion of the system check, this display (5) shows for 30 seconds the filters and oil which are near the replacement interval. The maintenance caution lamp also flashes or lights up at the same time. After replacing the filter or changing the oil, reset the replacement interval. For details, see "RESET METHOD FOR FILTER, OIL REPLACEMENT TIME (PAGE 3-26)". 3 - 10 REMARK The top line of the character display shows the name and ID number of th e item needing replacement. The line at the bottom shows the re replaced.
maining time until replacement and the total number of times the item has been been After giving the display for 3 0 seconds, the display does not appear again until the startin g switc h is turned a gain to the ON position. If the action code is being dis played, the message in the diagram above is not displayed o n the character display. If there two or more items to be displayed, they are displayed every three seconds. If there are more than 10 ite ms to be displayed, all the items are displaye The display is given when t he time reaches 30 hours before the filter and oil replaceme nt interval.
When the replacement inte rval approaches, the maintenance caution lamp flashes, and if the replacement p lights up. he replacement interval has passed, the lam