. OPERATION EXPLANATION OF COMPONENTS Regardless of the position of the switch, when the differential lock is lamp lights up. differential lock, see "OPERATION 3 - 35 INTER-AXLE DIFFERENTIAL LOC This s witch (12) can be used t o switch the actuating conditi ons for the in ter-axle differential lock. When this switch is pressed, the system is switched to MA NUAL. When the switch is not pres syste m is switched to AUTO. AUTO : The slippage of the fro nt axle is detected and the int er-axle differential lock is auto MANUAL:
When the shift lev xle differential lock is actuate differential lock pilo When working at night, the sy mbol inside the switch lights up regardless of th e selected posi tion of the switc For d etails when using the dif ferential lock, see "OPERATI ON USING DIFFERENTIAL LOC K (PAGE 3-100) LEFT AND RIGHT DIFFERENTIAL LOCK SWITCH This s witch (13) can be used t o switch the conditions of the l eft and right d ifferential locks. the switch is pressed a nd the left and right differential lock When pedal is depressed, the left an d right differential locks are ac tuated if the shift range is F3, F2, F1 , R1, R2. neutral position, the left and right ted.
ar left and right differential locks are right differential locks are not left and right differential locks are When the switch is at the differential locks are not actua Position (a): Front, center, re actuated Neutral position (b): Left and actuated Position (c): Center and rear actuated For d etails when using the USIN G DIFFERENTIAL LOC