3. Operation (3) Carry out the next periodic inspection before placing the engine in storage. Clean the outside of the engine wiping off any dust or oil. (4) To prevent condensation inside the fuel tank, either drain off the fuel or fill the tank. (5) Grease the exposed area and joints of the remote control cable and the bearings of the remote control handle. (6) Cover the intake silencer, exhaust pipe , etc. with vinyl sheets and seal them to prevent moisture from entering. 1 .- Cooling water drain cocks (7) Drain bilge in the hull bottom com- pletely. Water may leak into the boat when it is moored, and whenever possible it should be landed. 1.
Open the water drain cocks (3 positions as illustrated) and drain the cooling water from inside. 2. Close the drain cocks after draining the (B) Waterproof the engine room to prevent rain and seawater from entering. water. (9) During long term storage, charge the battery once a month to compensate for the battery's self-discharge. 33