Engine Disassembly (00-01) CELECT™Lubricating Oil Pressure Sensor - Removal N14 Page 0-29 CELECT™Lubricating Oil Pressure Sensor - Removal Remove the oil pressure signal line. Remove the sensor mounting capscrews. Remove the sensor from the engine. CELECT™ECM Cooling Plate - Re- moval Remove the inlet and the outlet fuel hoses from the cool- ing plate. Remove the four cooling plate mounting capscrews. Do not lose any of the heat resistant grommets. The heat resistant grommets are on both sides of the cooling plate. One of the mounting locations has heat resistant star washer grommets on both sides of the cooling plate. Remove the cooling plate.
Fuel Pump - Removal CELECT™Engines Remove the fuel plumbing. Remove the four capscrews and remove the fuel pump. Remove the spider coupling.