. SAFETY SAFETY INFORMATION 2 - 14 BURN PREVENTION Hot coolant To prevent burns from hot wa checking or draining the coola ter or steam spurting out when nt, wait for the water to cool to a Hot temperature where it is possib hand before starting the operati cooled down, loosen the cap inside the radiator before remo Hot oil To draining the oil, wait for the oil to cool to at temperature where it is possible to touch the cap or plug by hand before starting the operation. Even when the oil h as cooled down, loosen the ca p or plug slowly to reliev e the internal pressure before removing the cap or plug. FIRE PREVENTION AND EXPLOSI ON PREVENTION w washer liquid are particularly dous.
To prevent fire, always me near fuel or oil. eling. hile adding fuel or oil. securely. ted surfaces or on parts of the r adding or storing oil and fuel. ermined place and do not allow er. up any spilled fuel or oil. or welding work on the chassis, erials to a safe place before use a non-flammable oil. Diesel ire, so do not use them. lammable materials into a safe at the work place. torch to cut any pipes or tubes ds. mmable material. Fire Do not smoke or use any fla Stop the engine before refu Do not leave the machine w Tighten all fuel and oil caps Do not spill fuel on overhea electrical system.
Use well-ventilated areas fo Keep oil and fuel in the det unauthorized persons to ent After adding fuel or oil, wipe When carrying out grinding or welding work on the chassis, move any flammable mat starting. When washing parts with oil, use a non-flammable oil. Diesel oil and gasoline may catch f Put greasy rags and other f container to maintain safety Do not weld or use a cutting that contain flammable liqui Fire caused by accumulation of fla Remove any dry leaves, chips, pieces of paper, dust, or any other flammable materials a ccumulated or affixed around the engine, exhaust ma nifold, muffler, or battery, or inside the undercovers.