. SAFETY SAFETY MAINTENANCE INFORMATION Set safety lock lever (1) to the LOCK position. When carrying out operations near the fan, fan belt, or other rotating parts, there is a hazard of being caught in the parts, so be careful not to come close. Do not touch any control levers. If any control lever must be operated, give a signal to the other workers to warn them to move to a safe place. 2 - 34 TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNING To prevent injury, do not carr y out maintenance with the en st be carried out with the en gine running. If maintenance mu gine running, carry out the operatio n with at least two workers and d o as follows.
One worker must always sit in the operator's seat and be r eady to stop the engine at any time. All workers must maintain ers. contact with the other work Never drop or insert tools o r other objects into the fan or fa n belt. Parts may break or be PROPER TOOLS Use only tools suited to the task and be sure to use the tools ools correctly. Using damaged, lo w quality, faulty, makeshift too ls or . improper use of the tools coul d cause serious personal injury ACCUMULATOR The accumulator is charged with high-pressure nitrogen gas. gas. When handling the accumula tor, careless procedure may c ause an ead to serious injury or property always observe the following cumulator.
r dispose of it in fire. ld it, or use a cutting torch. ulator, or subject it to any impact. Do not disassemble the ac Do not bring it near flame o Do not make holes in it, we Do not hit or roll the accum ulator, or subject it to any impa When disposing of the accu mulator, the gas must be released. Please contact your Kom performed. atsu distributor to have this work work