Locking the door with the mechanical key emergency lock In the case of power failure of the vehicle, the left front door is locked with a mechanical key, and the other three doors are locked with the emergency locks that come with the door locks. Vehicle unlocking Replacement of key battery When the smart key power is low, the instrument cluster will remind you to replace the battery. Improper operation when replacing the battery will damage the key. It is recommended to replace it at the BAIC MOTOR franchised dealer. If you replace it by yourself, you need to use CR2032 lithium battery. Method of replacing smart key battery:
Be careful not to touch the circuit board of the remote controller; otherwise, static electricity may be generated, which may damage the smart key. When replacing the battery of the key, you should not lose any part. 1. Remove the mechanical key; 2. Pry up the rear cover of the smart key with a tool; Waste battery must be disposed of in accordance with local laws. Ensure that the positive and negative poles of the smart key battery are installed correctly. 1. Take out the mechanical key; 2.
Open the door, insert the mechanical key into the emergency lock switch ① , rotate the left rear door lock counterclockwise, and the right rear and right front door lock rotate clockwise to lock the door; 3. Close the door. Do not touch or move any parts in the smart key; otherwise it will affect the smart key function. When installing the smart key battery, be careful not to bend the electrodes, and the battery box must not contain dust or greasy dirt. 22