2-22 CAB AND FRAME Removal 1. Meter cluster Pull the main unit toward you and remove the clips at 7 positions. Remove each switch con- nector. When switches are mounted on the switch cover, remove the connectors. Remove the vent grille, switch cover and each switch from the cluster proper. N2A0040E Legend 1. Clip position 2. Drink holder 3. Control unit cover 4. Ashtray 5. Cigar lighter 6. Clip section 7. Center cluster N2A0039E Legend 1. Clip position 2. Switch 3. Vent grill 4. Clip section 5. Switch cover 3. Glove box Open the lid and remove the 4 mounting screws. Then, remove the main unit. Remove the left and right stays, remove the 3 mounting screws, and remove the lid. 2.
Center cluster Pull out the pin from the lid and remove the spring and lever. Pull the main unit toward you and remove the clips A at 4 positions, clips B at 3 positions, ci- gar lighter power source and ashtray lighting connector. When an auto air conditioner is mounted, remove the room sensor. Caution: The Instrument panel assembly of this item can be re- moved without disassembling each of the parts of above items 1 — 3. Remove the drink holder, control unit cover (or glove compartment), ashtray and cigar lighter from the center cluster proper. Caution: Remove the clips B with a bladed screwdriver.