CAB AND FRAME 2-29 N2A0052E N2A0054E Open the door and support it with garage jack etc. Installation For installation, reverse the removal procedure taking the following points into consideration. 1. Tighten the mounting bolts to the specified torque. Caution: To prevent scratches, support it with a waste cloth or wooden piece (7). Tighten: Mounting bolt to 24 N m (2.4 kg m/17.7 lb ft) 2. Adjust the door installation position referring to “Body Panel Assembly” in Body Panel Section. N2A0053E Remove the 2 mounting bolts for each hinge on the rear side while the door is open.