2-34 CAB AND FRAME 2. To install the inner waist seal (2), align the front end so that the seal hang over the 4 claws (4) of upper part of the trim pad (3) and insert the clips in sequence starting from the front end clip (1). Note that applying force in transverse direction will cause deformation. Front Pillar Garnish Removal 1. Front pillar garnish Peel off the magic tape and pull it toward you. Pull out the clips at 2 positions. Caution: Be extremely careful that the painted surface of pillar bottom part may be scratched by the cored bar of the both ends of inner waist seal during removal. If it get damaged, touch up it with appropriate color to prevent rust.
N2A0226E Installation For installation, reverse the removal procedure. N2A0063E