CAB AND FRAME 2-51 5. Reclining cover Grease: MITSUBISHI MULTI-PURPOSE No.2 or equiv- alent Remove the one screw. 6. Reclining adjuster assembly Remove the fixing bolt. 7. Seat cushion assembly (Non-tilt cab model only) 8. Seat back assembly 9. Seat adjuster Remove the 2 bolts. Installation For installation, reverse the removal procedure taking the following point into consideration. 1. Before installing the seat assembly, apply grease (1) to the backward half of the cab-side seat rail (2) and set the claw on the seat frame side (3). After that, tighten the cap nut (with lock), plain washer and seat bolt (with Loctite) securely. Tighten:
19 N m (1.9 kg m/14.0 lb ft) N2A0090E Fixing Torque N2A0091E