2-60 CAB AND FRAME Header Shelf N2A0100E Legend 1. Side bracket 6. Screw 2. Center bracket 7. Grommet 3. Bracket cover (without roof ventilation) 8. Clip 4. Screw 9. Room lamp/mirror 5. Header shelf assembly 10. Sun visor/holder Removal Slide the left-hand 1 screws and right-hand 1 screws and the roof ventilator cover backward, then pull them out. Remove the one screw in the center of the rear side. 5. Header shelf assembly 6. Center bracket 1. Battery ground cable 2. Room lamp/mirror Remove the lens and remove 2 mounting screws and connector. 3. Sun visor/grommet Remove the 2 mounting screws and 1 nut. (With roof ventilation) Remove the 2 mounting screws.
For a custom vehicle, a sun visor is mounted on each of the left and right sides. 4. Mounting screw Remove the 2 clips. (Without roof ventilation) 7. Side bracket