2-72 CAB AND FRAME Rear Seat Belt (Crew Cab Model) Component N2A0120E Legend 1. Rear pillar lower trim cover 5. Seat belt lower anchor bolt 2. Through anchor cover 6. Retractor fixing bolt 3. Seat belt upper anchor bolt 7. Bracket 4. Rear seat belt assembly 8. Clip Removal Installation 1. Seat belt lower anchor bolt 2. Rear pillar lower trim cover For installation, refer to “Tongue Side Seat Belt (Single Cab Model)” in this Section, and reverse the removal procedure. Remove the 2 clips and pull it upward. 3. Through anchor cover 4. Seat belt upper anchor bolt 5. Retractor fixing bolt Remove the bolt, and pull the retractor upper bracket from panel to remove it.