2-86 CAB AND FRAME Cab Lock Assembly N2A0141E Legend 1. Cab lock control unit fixing bolt 7. Wave washer 2. Cab lock assembly fixing nut 8. Snap pin 3. Cab lock assembly 9. Hand lever hook rod 4. Hook rod assembly 10. Cab tilt switch 5. Washer 11. Cab control unit assembly 6. Adjust nut 12. Tilt handle assembly Removal Remove the 3 fixing bolts, and disconnect the harness connector of cab tilt switch. 6. Tilt handle assembly 1. Disconnect the battery cable. 2. Hand lever hook rod Pull out the snap pins and remove the washers and wave washers. 3. Hook rod assembly 4. Cab lock assembly Remove the 3 tilt handle fixing bolts. Remove the 4 fixing nuts. 5. Cab lock control unit assembly