OWNER 爷 S MANUAL JAC HEAVY DUTY TRUCK 3. Locking from outside CENTRAL DOOR LOCKS (If installed) The doors can be locked without a key. The central door locking system is located on the driver's door lock button. It is operated by depressing the door lock First push the lock knob down, then close the door while depressing the push button. If the front door is open when the button is depressed, the door will lock when closed. NOTE: button forward. When the front door lock button is depressed, the front doors will lock. When the front door lock button Is pulled up, the front doors will unlock. POWER WINDOWS (If installed) The power windows operate when the ignition key is in the 'ON' position.
The main switches are located on the driver's door side and control the passen 鄄 ger's side. The windows may be opened by depressing the appropriate win 鄄 dow switch and closed by pulling upon the switch. To open the window on the driver's side, press the switch (1) halfway down. The windows moves as long WINDOW GLASS as the switch is operated. To fully open the driver's window automatically, press the switch fully down. In automatic operation, the window will fully open To raise or lower the window, turn the window, regulator handle clockwise or even if you let go of the switch. To stop at the desired opening, pull upon and counterclockwise. WARNING: release the switch.
In order to prevent operation of the window by passenger, When opening or closing the windows, make sure your passenger's arms and a window lock switch (2) is provided on the driver's door. There are two types of the power window switch. One operates for 30 seconds after the ignition hands are safely out of the way. key is turned to "ACC' or 'LOCK', but the power window glass doesn't move when doors open. 6 7