15 PERIODIC SERVICE ENGLISH 4. If the oil level is too low, remove the oil filler plug, and add new oil to the prescribed level. 5. After adding oil, wait more than 5 minutes and check the oil level again. It takes some time for the oil to drain down to the oil pan. 1. Change oil after the initial 50 hours of operation and every 200 hours thereafter. (See table below.) A Changing interval thereafter Engine oil quantity * 90 mm (3.54 in.) oil pan depth is optional. **Standard replacement interval A API service classification : above CD grade A Ambient temperature : below 35 C (95 F ) * 90 mm (3.54 in.) oil pan depth is optional. Oil quantities shown are for standard oil pans.
A Engine oil should be MIL-L-2104C or have properties of API classification CD grades or higher. Change the type of engine oil according to the ambient temperature. 2. Remove the drain plug at the bottom of the engine, and drain all the old oil. Drain oil will drain easier when the oil is warm. A When using oil of different brands from the previous one, be sure to drain all the previous oil before adding the new engine oil. B Changing engine oil To avoid personal injury: A Be sure to stop the engine before draining engine oil. A When draining engine oil, place some container underneath the engine and dispose it according to local regulations. A Do not drain oil after running the engine.
Allow engine to cool down sufficiently. (1) Oil drain plug 3. Add new engine oil up to the upper limit of the oil level gauge. Models Oil pan depth 124 mm (4.88 in.) *90 mm (3.54 in.) D1503-M-E D1703-M-E D1803-M-E V2003-M-E V2203-M-E V2003-M-T-E V2403-M-E 200 Hrs 150 Hrs Initial 50 Hrs Models Oil pan depth 124 mm (4.88 in.) *90 mm (3.54 in.) D1503-M-E D1703-M-E D1803-M-E 7.0 L (1.85 U.S.gals.) 5.6 L (1.48 U.S.gals.) V2003-M-E V2203-M-E V2003-M-T-E V2403-M-E 9.5 L (2.51 U.S.gals.) 7.6 L (2.01 U.S.gals.) above 25 C(77 F) SAE30 or SAE10W-30 SAE15W-40 0 C to 25 C(32 F to 77 F) SAE20 or SAE10W-30 SAE15W-40 below 0 C(32 F) SAE10W or SAE10W-30 SAE15W-40