6 SEBU8726-03 Safety Section General Hazard Information Illustration 2 g02582556 Typical example i06702758 General Hazard Information Tampering with the engine installation or tampering with the OEM supplied wiring can be dangerous. Personal injury, death and/or engine damage could result. Vent the engine exhaust to the outside when the engine is operated in an enclosed area. If the engine is not running, do not release the secondary brake or the parking brake systems unless the vehicle is blocked or unless the vehicle is restrained. Wear a hard hat, protective glasses, and other protective equipment, as required.
When work is performed around an engine that is operating, wear protective devices for ears to help prevent damage to hearing. Do not wear loose clothing or jewelry that can snag on controls or on other parts of the engine. Illustration 3 g00104545 Attach a Do Not Operate warning tag or a similar warning tag to the start switch or to the controls before the engine is serviced or before the engine is repaired. Attach the warning tags to the engine and to each operator control station. When appropriate, disconnect the starting controls. Ensure that all protective guards and all covers are secured in place on the engine. Never put maintenance fluids into glass containers.
Glass containers can break. Do not allow unauthorized personnel on the engine, or around the engine when the engine is being serviced. Use all cleaning solutions with care. Report all necessary repairs. Unless other instructions are provided, perform the maintenance under the following conditions: The engine is stopped. Ensure that the engine cannot be started.