INTRODUCTION FOREWORD INTRODUCTION 1 This Komatsu machine is designed to be used mainly for the following work: q Dozing q Cutting into hard or frozen ground or ditching q Felling trees, removing stumps q Pushing q Ripping For further details, see “WORK POSSIBLE USING BULLDOZER (3-127)“ and “RIPPER OPERATION (3-120)“. FRONT/REAR, LEFT/RIGHT DIRECTIONS OF MACHINE 1 (A) Front (E) Operator's seat (B) Rear (F) Sprocket (C) Left (D) Right In this manual, the terms front, rear, left, and right refer to the travel direction as seen from the operator's seat when the operator's seat is facing the front and the sprocket is at the rear of the machine. 1-8