34 Product Information Section (D6T LGP (OEM)) WEBM1000 General Information Product Information Section (D6T LGP (OEM)) Table 4 General Information Specifications 24 Illustration 24 The basic machine specifications are listed below. (1) NACD Engine Rated Speed (North America) (2) Non-NACD Engine Rated Speed is 1920 RPM (3) The length of the machine is measured from the front of the machine to the end of the drawbar. Add 145 mm (5.7 inch) for long drawbar assembly. (4) VPAT trunnions are attached at the case and frame. (5) The weight includes the machine and the following items: 10% tank of fuel, all lubricants, coolant, hydraulic controls, the rops/fops structure and and the standard track.
Restrictions to Application and Configuration Maximum approved operating weight is 29484 kg (65000 lb). Maximum towing force of a drawbar is 320 kN (71940 lb). Maximum vertical load for a drawbar is 137 kN (30800 lb). The capability of the brake is equal to the ROPS capability of 29484 kg (65000 lb) when the slope is less than 45 degrees. D6T Track-Type Tractor LGP Engine Power 200 hp std Engine (Make and Model) Caterpillar C9.3 Engine Displacement 9.3 L (567 in3) Engine Rated Speed 2010 RPM(1)(2) Engine (No.
of Cylinders) 6 Height (Top of ROPS) (A) 3233 mm (127.3 inch) Length of the Machine(3) (B) 4089 mm (161.0 inch) Height to Top of Exhaust Stack(C) 3193 mm (125.7 inch) Ground Clearance (D) 396 mm (15.6 inch) Track Gauge (E) 2286 mm (90.0 inch) Width Over Trunnions (F)(4) 3479 mm (137.0 inch) Height of the Drawbar 511 mm (20.1 inch) Width of Track Shoe 660 mm (26 inch) Length of Track on Ground 3243 mm (127.7 inch) Shipping Weight(5) 19527 kg (43050 lb) Drawbar (Length) 165 mm (6.5 inch)