Fuels, Lubricants, and Coolant/Engine Break-In Oil ENGINE BREAK-IN OIL New engines are filled at the factory with John Deere ENGINE BREAK-IN OIL. During the break-in period, add John Deere ENGINE BREAK-IN OIL as needed to maintain the specified oil level. IMPORTANT: Do not use John Deere PLUS-50 oil or engine oils meeting API CG4, API CF4, or CCMC D5 performance levels during the first 100 hours of operation of a new or rebuilt engine. These oils will not allow the engine to break-in properly. Change the oil and filter after the first 100 hours of operation of a new or rebuilt engine. 02 2 After engine overhaul, fill the engine with John Deere ENGINE BREAK-IN OIL.
If John Deere ENGINE BREAK-IN OIL is not available, use a diesel engine oil meeting one of the following during the first 100 hours of operation: • API Service Classification CE • CCMC Specification D4 After the break-in period, use John Deere PLUS-50 ® or other diesel engine oil as recommended in this manual. DX,ENOIL4 -19-17OCT94 CTM42 (24MAR95) 02-2 6076 Diesel Engines—S.N. (500000— ) 160101 PN=21