11. EXPLANATION OF COMPONENTS 6. BLADE CONTROL LEVER This lever is used to raise or tilt the blade. Lifting control 0 RAISE ( fi ) 0 HOLD ( h ) Blade is stopped and held in this position. 0 LOWER ( bf_ ) Raise t 1 Lower Tilting control 8 LEFT TILT ( & ) @ RIGHT TILT ( J,-& ) REMARK The blade can be tilted at any position of 0 to 0. The lever should be returned quickly to HOLD position at the end of tilt cylinder stroke. Do not operate tilting when blade is at top or bottom position. 2-18