11. EXPLANATION OF COMPONENTS 4. Selection of program 1) Automatic selection When one side of the tape is finished, the tape will change direction so that there is no interruption. Manual selection When the program selection switch is depressed before one side of the tape is finished, the tape will change direction. 5. Program indicators The direction in which the tape is moving during PLAY is indicated by two indicators. 6. FF (fast forward), REW (rewind) When the FF or REW button is depressed, the button will be locked and the tape will run in fast forward or rewind.
To release the button, 2) l depress the button which is not depressed, or l depress both the FF and REW buttons simultaneously (At this time, the cassette tape will spring out of place), or l wait until the tape finishes playing. (After the button is automatically released, the opposite side of the tape will start playing), or l depress the program selection button. (After the button is released, the other side of the tape will PLAY.) 7. Volume control As the volume control knob is turned clockwise, the tape plays louder. 8. Balance control When the balance control knob is pulled out and turned clockwise, the volume from the R.H. speaker increases.
When turned counterclockwise, the volume from the L.H. , speaker increases. Tone quality control When the tone quality control knob is turned clockwise, high tones will be intensified. When turned counterclock- wise, the low tones will be intensified. Roundness control When the roundness control switch is depressed, both the high tones and low tones will be intensified, even if the volume of the sound is low. 9. 10. 2-26