OPERATION A WARNING! If the machine has to be started on a slope, always turn the transmission cut-off selector switch to OFF and depress the left brake pedal. Then depress the accelerator pedal while releasing the left brake pedal to start the machine off slowly. 2. WORKING LAMP AND CLUSTER GAUGE CHECK SWITCH Position 1: Front and rear working lamps and pilot lamp light. Position 2: Center position is OFF. Position 3: It is possible to check the lamps of the cluster gauge for blown-out bulbs. If the lamps light when the switch is in this position, the bulbs are normal. LllAM070 WARNING! Turn off working lamps when traveling on public roads. A 3.
LAMP SWITCH When this switch is pulled, the head lamps light. Position 1: OFF Position 2: Low beam Position 3: High beam When this switch is operated, the clearance lamps, the tail lamps and the panel lamp will also light up.