OPERATION 6. ETHER START SWITCH This switch (6) is used when starting the engine in cold weather. ON position: A fixed amount of ether (approx. 3 cc each time) is injected into the engine intake to make it easier to start the engine in cold weather. 6 OFF position: When the switch is released, it automatically returns to the OFF position. A WARNING! Do not keep the switch at the ON position for more than 5 seconds. 7. CAB DOME LAMP SWITCH When this switch (7) is pushed in, the cab dome lamp should light. When the switch is pushed in again, the cab dome lamp should go out. I 11 AMWl 8. FRONT WIPER SWITCH The wiper switch (1) is actuated at low and high speed.
When this switch is turned clockwise, solvent will be sprayed onto the glass. 9. REAR WIPER SWITCH When this switch (2) is pulled to ON position, the wiper operates on the rear glass. When this switch is turned clockwise, solvent will be sprayed onto the glass. 2-11