. OPERATION TROUBLESHOOTING STARTING THE ENGINE WARNING DISCONNECTING THE BOOSTER CABLES terminal of the problem machine. 3 - 148 Apply the parking brakes, s et the gear shif t lever to the N position on both the n ormal machine and the problem machine to prevent the machine f rom moving d uring the starting operatio n. If the machine moves, it may lead to se 1. Make sure t he clips are firmly connected to t he battery terminals 2. Start engine of the n ormal machine and run i t at High i dle ( MAX 3. Turn the starting swi tch of the failed machine to STAR T position and start the eng If the engin e doesn't start at f irst, try again af ter 2 minutes o r so.
After the engine has star ted, disconnect t he boost er cables i n the reverse of the order in which they were connected. 1. Remove 1 c lip of boo ster cabl e (B ) from the e ngine bloc k of t problem machine. 2. Remove the other cli p of booster cable (B) fro m the negative terminal of t he norm al machine. 3. Remove on e clip of booster cable terminal of t he norm al machine. 4. Remove the other cli p of booster cable (A) fro m the positive (