. ATTACHMENTS, OPTIONS HANDLING TACHOGRAPH (TCO20-90W) CUTTER SPEED WARNING SETUP CONFIRMATION WINDOW confirmation window (18) is the window to check the speed set by the speed warning METHOD OF USE apply the lock. If the cover is not closed This will cause breakage of the cover close the cover if the key 2. Turn the key fully to the left, then pull lightly. The cover will open. REMARK 6 - 5 PANEL LIGHTING L Thes e panel lightin g lamps (15) are the lamps do illumi nate the gauges. ( There are three This cutter (16) is t he blade to cut th e connecting tape of the chart paper. TIME ADJUSTMENT SWITCH This time adjustme nt switch (17) is used to adjust the h ands of the clock.
This speed warning setu p adjustment s SPEED WARNING SETUP ADJUSTMENT SCREW This speed warning setup adjustmen t screw (19) is used to set the desired speed for the tr avel warning lamp t o light up. The range for the s etting is 40 to 90 OPENING AND CLOSING COVE When closing th e cover, align th securely, the sp eed indicator will not work properly. When opening t support. When opening o r closing the tac hograph, use the ke y to open or close Always turn the key fully to the l eft when closing th position. This wi ll cause damage to the case or lock is in any other METHOD OF OPENI NG COVER 1. I nsert the key in the keyhole (1) METHOD OF CLOSI 1. T 1.
T urn the key ful ly to the left, and use the key to clo Check that the cover and case are correctly aligned Whe n the cover is c losed, it will feel heavy, but this is n 2. T urn that the ke y fully to the righ t, then remove it. T he cover will clos