.
ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER II (CARD TYPE) ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER II (CARD TYPE) 6 - 76 Remarks - - Detected only when card dump operation is run Rated voltage:3.6V - - Calibration cannot be carried out when problem has occurred Recording of problem and warning data (display code for personal computer software) - - - Record (000-009) Record (000-011) (000-012) (000-013) (000-014) Record (000-018) Record (000-020) Timing possible for display Gear shift lever at N Gear shift lever at position other than N Removal detection only for card dump Except when loading Except when loading When engine is running When normal Content of error code display Display canceled When problem is removed When problem is removed When problem is removed When problem is removed See (*1) When problem is removed When problem is removed External display lamps All flash - - - - All flash All flash Panel display b-FL lights up b-FL lights up Cd flashes F-09 flashes See (*1) F-18 flashes F-20 flashes Judgment standard - - Defective contact or voltage below 2.7V See (*1) Output with the engine running is less than 2V Output below 15V and power source voltage over 20V Content Dump lever not at FLOAT (except when dumping) Memory card removed Drop in backup battery voltage Cycle data memory FULL Engine ON/OFF data memory FULL Problem, warning data memory FULL Total payload, overall number of cycles data memory FULL Disconnection at R terminal Problem in sensor power source (18V) Priority of display 1 2 3 4 5 6