. ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER II (CARD TYPE) ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER II (CARD TYPE) (2). from the motherboard 8. Insert the connector of the new battery straight into the connector of the motherboard. 6 - 83 5. from the top cov er of the payload meter , the n remove to p cover 6. Remove battery (5) from battery holder (4), then p ut it o n top of a board. Remove conne holder (4). ctor (6) after removing the battery from battery If it is attempted to use force to remove connector (6) when the battery is still in battery hold er (4), there is damger that connector (6) m ay be damaged. 7. out connector, then remove the battery (5) 9.
Put the battery in the battery holder (4), and pass the wiring ch (7). through the not When doing this , insert the wirin g into t he b ottom of the holder and pass it in th rough the notch . 10. Install top cover 11. Assemble the p ayload meter to it s originalp ositio n in the panel.