. OPERATION EXPLANATION OF COMPONENTS HAZARD LAMP SWITCH When this hazard lamp switch (6) is operated, the left and right turn signals flash at the same time. Use this when the machine is stopped. When portion (A) of the switch is pressed, the left and right turn signal lamps flash at the same time and the monitor lamp inside portion (A) of the switch also lights up. When portion (B) of the switch is pressed, the left and right turn signal lamps go out and the monitor lamp inside portion (A) of the switch also goes out. EMERGENCY STEERING SWITCH Use this emergency steering switch (7) to actuate the emergency steering pump.
When this switch is pressed, the emergency steering pump is actuated, the red monitor lamp inside the switch lights up, the pilot lamp on the machine monitor lights up, and it becomes possible to operate the steering. CIGARETTE LIGHTER Use this cigarette lighter (8) to light cigarettes. CAUTION with flammable substances in the The cigarette lighter can also be used as a DC 24 V power source. Capacity: DC 24V 10A 3 - 40 If t he machine head lamps are lig of the hazard lamp switch lights Do not touch the glowing red por you. After using the cigarette lighter, Do not leave the cigarette lighter cause fire if it comes into conta operator's compartment or opera .
Push the cigarette lighter in once. After several seconds, the cigarette lighter will gl ow red and will return to its original position and use it to light your cigarette. . Pull the cigarette lighter out