(7) No load max. speed When the load decreases from full load max. speed and engine speed further increase, the increased thrust load of the governor weight acting on the governor spring through the tension lever exceeds the set load of the spring, the tension lever and governor lever descend clockwise, the control rack is pushed to the no load injection volume position (RH), and the engine is operated at no load max. Speed. When the engine is being used at partial load, the governor spring functions in the same way at a lower speed (i, i'-j) as for full load max. Speed, as the governor spring set load is smaller.
(8) Stopping engine The engine stops when you turn the governor control lever all the way towards stop. On engine equipped with a stop device, the engine can be stopped by moving the control rack to the stop position, regardless of the control lever position. 16