4.3.5. Adjustment of Staring Injection Amount ① Set the engine speed at the starting injection amount adjust speed and leave the regulator lever at the position in 2 above. ② Screw in the starting injection amount adjust bolt and adjust it to obtain the specified injection amount. ③ Set the pump speed at 50 min -1 and check that the amount exceeding the specifications is being injected. 4.3.6. Checking the Injection Stop Leave the regulator lever at the position as before. ① Checking the Injection Stop: Set the pump speed at the speed 50min-1 higher than the no load max. speed, and check that the injection amount reduces to zero. ② Checking the Stopping:
Set the pump speed at the rated speed, turn off the stop solenoid and check that the injection amount reduces to zero. 48