. OPERATION EXPLANATION OF COMPONENTS port are METHOD OF OPENING AND CLOSING CAP WITH LOCK (FOR THE FUEL TANK FILLER PORT) FRAME LOCK BAR WARNING 3 - 61 CAP WITH LOCK The fuel tank filler port equipped with locks. and the hydraulic tank fille to open and close the cap. The fu el tan equipp ed wit Use th e starting switch key to open and c lose TO OPEN THE CAP key slot. 1. Ins 2. Tur the Po Po 1. Ins ert the key into the 2. Tur n the key clockwise , align the key groove with m ark (1) on cap, t hen open the cap. sition ( A): OPEN B): LOCK sition ( TO LOCK THE CAP 1. Tur n the cap until tight , then insert the key into the 2.
Tur n the starting switc h key to LOCK position (B), t hen remove the Whe n carrying out mainten ance or transporting the machin e, always set the frame lock bar to t he LOCK position . Alwa ys remove the frame l ock bar for travel operations. If it is not removed, the steering whee l cannot be used for steering and t his ma y lead to seriou s damage or injury . This is a device used to lock the front and rear frames during sporting the machine. It prevents the articulating. nd rear frames are locked and machine and rear fram es during maintenance or when tran front and rear frames from (L) LOCK position: Front a cannot carryin (F) FREE position: Set to t articulate.
Se g out inspectio his position for t to this posi n and mainten normal opera tion when ance. tions.