. SAFETY PRECAUTIONS FOR OPERATION PRECAUTIONS FOR OPERATION PRECAUTIONS FOR JOBSITE 2 - 21 INVESTIGATE AND CONFIRM JOBSIT E CONDITIONS s hidden dangers that may lead to personal injury or death. Before starting wing to confirm that there is no danger on the jobsite. On t he jobsite, there are variou operations, always check the follo wing to confirm that there is no danger on the jobsite. When carrying out operations n ear combustible materials such as thatched roofs, dry leaves or dry grass, there is a hazard of fire, so be carefu l when operating. Check the terrain and condition of the ground at the worksite, and determine the safes t method of operatio n.
Do not operate where there is a ha zard of landslides or falling rocks. h-voltage electrical lines may be act each utility and identify their er or damage any of these lines. revent any unauthorized person a. ate on a road, protect pedestrian on for worksite traffic duty or by rksite. water or on soft ground, check rrent, bedrock, and shape of the ny place that will obstruct travel. he jobsite so that there is no . If water lines, gas lines, or hig h-voltage electrical lines may be buried under the worksite, cont act each utility and identify their locations. Be careful not to sev er or damage any of these lines.
Take necessary measures to p revent any unauthorized person from entering the operating are In particular, if you need to oper and cars by designating a pers installing fences around the wo When traveling or operating in the water depth, speed of the cu rrent, bedrock, and shape of the ground beforehand and avoid a ny place that will obstruct travel. Maintain the travel path on t obstruction to travel operations WORKING ON LOOSE GROUND Avoid traveling or operating y our machine too close to the edge of cliffs, overhangs, and deep ditches. The ground may be weak in such a reas.
If the ground should collapse under the weight o r vibration of the machine, there is a hazard that the mach ine may fall or tip over. Remember t hat the soil after he avy rain or blasting or after earthquakes is weak in these a reas. When working on embankment s or near excavated ditches, there i s a hazard that the weight and vibration of the machine will cause the soil to c ollapse. Before starting operations , take steps to ensu re that the ground is safe and to prevent the machine fro m rolling over or falling.