Special Menu Screen NOTE: Displayed language on the special menu screen consists of Korean and English. SPECIAL MENU 1. Machine Info If any language except for Korean is selected during language selection mode of main menu, only English will be displayed on special menu screen. 2. Failure Info 3. Operating Hrs : UP : DOWN : SELECT FG000558 Figure 25 Exiting/Escaping Menus 1. If escape button (ESC, 4 on Figure 23) is pressed for more than 1 second, the special menu screen will be returned to the normal mode screen. 2. If this special menu is "ON" without any activity, for more than 20 seconds, it will turn to the normal mode screen. 3.
After the turning starter switch to the "OFF" position, turn it back to the "ON" position, and the normal mode screen displayed once again. Special Menu Selections Submenu Selection Method Various sub-menus can be selected by pressing "Up ( , 1 on Figure 23)" and "Down ( , 2 on Figure 23)" button. SPECIAL MENU 1. Machine Info Move the cursor to desired menu and a selected menu will be inverse displayed. 2. Failure Info When the selected menu is inverse displayed, press the "Enter ( , 3 on Figure 23)" button for menu selection. 3. Operating Hrs : UP : DOWN : SELECT FG000558 Figure 26 Information of Machine Status 1. Entering Sub-menus:
When cursor is located on "Machine Info" of special menu screen, press "Enter ( , 3 on Figure 23)" button and the "Machine Info" will be displayed. MACHINE INFO 1. Analogue Input State 2. Exiting Sub-menus: If escape button (ESC, 4 on Figure 23) is pressed for more than 1 second, display will be turned to previous screen. 2. Digital Input State 3. Digital Output State FG000559 Figure 27 : UP : DOWN : SELECT SP001727 Page 37 Electrical System