. SAFETY PRECAUTIONS FOR MAINTENANCE SAFETY PRECAUTIONS FOR MAINTENANCE Parts may break or be sent flying. 2 - 34 Lock the front a nd rear frames with safety bar TWO WORKERS FOR MAINTENANCE WHEN ENGINE IS RUNNING To prevent injury, do not carry out maintenance with the engi ne running. If maintenance must be carried out with the engine runnin g, carry out the operation with at least t wo w One worker mu st always sit in the o perator's s eat and be re ady to stop the en contact with the gine at any time.
worker maintain When carrying out operations nea ther rotating parts, t be careful not t here is a hazard of being caug ht in the part s, so Never drop or in sert tools or other o bjects into t he fan o r fan belt. Set safety lock l ever (1) to the LOCK position to prevent the work equipment from position to prev moving. Then pull parking bra ke lever (2) to the ent the machine fro m moving. rol lever must be Do not touch a ny control levers. I f any cont operated, give move to a safe a signal to the other workers to warn them to place. INSPECTION AND MAINTENANCE AFTER TURNING E.C.S.S. SWITCH OFF For machines equ ipped with a E.C.S. S. lower the bucket to th e ground, turn the E.C.S.S.
switch OFF, and stop the engine before sta rting inspection or m aintenanc e. NEVER tu rn the switch ON during in spection or maintenance