E EMC50010* Remote control lever Moving the lever forward from the Neu- tral position engages Forward gear. Pulling the lever back from Neutral engages Reverse. The engine will contin- ue to run at idle until the lever is moved about 35° (a detent can be felt). Moving the lever farther opens the throttle, and the engine will begin to accelerate. q w e r R N F r t y y u t u 701031 q w e r r 1 Neutral 2 Forward 3 Reverse 4 Shift 5 Fully closed 6 Throttle 7 Fully open t t y y u u 702032 EMC50110 Neutral interlock trigger To shift out of Neutral, the neutral inter- lock trigger of the remote control lever must first be pulled up.
UP DN EMC50210 Neutral throttle lever To open the throttle without shifting into either Forward or Reverse, place the remote control lever in the Neutral posi- tion and lift the neutral throttle lever. NOTE: The neutral throttle lever will operate only when the remote control lever is in Neu- tral. The remote control lever will operate only when the neutral throttle lever is in the closed position. 701034** N q w 701033* 1 Fully open 2 Fully closed 2-4