E EMU01112 Power Trim/Tilt Switches The power trim/tilt adjusts the motor angle in relation to the transom. The power trim/tilt switch is located on the remote control lever grip. Individual- engine switches are also on the control cover. Pushing the switch “UP” trims the motor up, then tilts the motor up. Press- ing the switch “DN” tilts the motor down and trims the motor down. When the switch button is released, the motor will stop in its current position. NOTE: 8 On the dual engine control, the switch on the remote control grip controls both engines at the same time. 8 Refer to the sections “Adjusting Trim Angle” and “Tilting Up/Down” in Chap- ter 3 for instructions on usage.
UP DN UP DN 701034** DOWN UP 702042 2-7