Pre-Starting * If engine is to be started and run indoors, ensure proper ventilation to remove deadly exhaust gases. * Always perform 'Pre-Starting Inspection' instructions described on page 4-2 to ensure the vehicle is ready for operation. * Always walk around the vehicle to make sure no-one is working on, underneath or close to the vehicle before starting the engine or operating the vehicle. * Adjust, secure and latch the seat and fasten the seat belt before starting the vehicle. * Sound horn before starting the engine or beginning to move the vehicle; two blasts for forward and three blasts for reverse.
Starting * Do not start the engine or operate any control if there is a 'DO NOT OPERATE' or similar warning sign attached to any control. * Use jumper cables only as recommended. Improper use can result in battery explosion or unexpected vehicle motion. * Always obey 'Starting the Engine' instructions described on page 4-6. * Do not bypass the vehicle’s neutral-start system. The neutral-start system must be repaired if it malfunctions. * Start and operate the vehicle only from the operator’s station. 2-8