iЊ€™ђ•ЋGy€ЉЊ uЊЊ‹“ЊG{Џ™њљ›GiЊ€™ђ• Install two bearing races and thrust bearing as shown in right figure. (5) H940AC5SE14 Assemble spool and sleeve carefully so that spring slots line up at the same end. Rotate spool while sliding parts together. Test for free rotation. Spool should rotate smoothly in sleeve with fingertip force applied at splined end. Align spring slots and identification marks in spool and sleeve and stand parts on end of bench. (6) z—™ђ•ЋGz“–› j–•›™–“Gz“ЊЊќЊ j–•›™–“Gz—––“ p‹Њ•›ђЌђЉ€›ђ–•Gt€™’љ H940AC5SE15 5-28